Specifications

3.8.3 Blank Buttons
Description: Blank those buttons that you want to be dynamic line buttons or autodial buttons.
NOTE: When blanking buttons, be sure a previously assigned button is idle (feature
not selected by user) before you blank it.
To Program: 1. Dial 56. “BUTTON MAPPING”
2. Dial 04. “BLANK/AUTODIAL”
3. Select all buttons to be programmed
—Press A1–A14, B1– B10.
4. Dial #.
5. Select station ports (LED On = Selected).
—Station 10–57 = Dial 10–57 or press C10-C57.
6. Dial ✳ for further button blanking
—OR—
dial ✳✳for next button mapping feature
—OR—
dial ✳✳✳for configuration mode.
3.8.4 Call Forward Button
Description: This button provides one-button forwarding of all calls to another extension.
To Program: 1. Dial 56. “BUTTON MAPPING”
2. Dial 11. “ASSIGN CALL FWD ”
3. Select button to be programmed
—Press A1–A14, B1–B10.
4. Select station ports (LED On = Selected).
—Station 10–57 = Dial 10– 57 or press C10–C57.
5. Dial ✳ for next CALL FORWARD button assignment
—OR—
dial ✳✳for next button mapping feature
—OR—
dial ✳✳✳for configuration mode.
To clear assignment , dial 5604, press button, dial # select station, and dial ✳✳✳.
DSU II Digital Telephone System IMI66–132
Programming The DSU II System 3 – 79