Specifications

Programming Reference Guide
Printed in the USA Page 9 GCA3A39-877, Rev 5, Issue 9/01
Feature Based Programming
VMMI Feature Based programming is a new capability of VMMI 16A and higher software
that allows installers to program the CCB database by selecting multiple items to manipulate
and modify within a particular database control.
In Feature Based programming, if you need to quickly program 4 stations with the same
ringing assignments, you simply group them together under an Items field and perform the
programming in a few quick steps.
When items are selected, any common similarities are highlighted in the programming field.
Above, stations 1001-1003 have the same Station RNA and Forward Type values set.
Grayed out areas indicate either:
• A feature not currently installed or associated with these stations (items)
• A programming option that is different between the selected stations or items
[TIP]
If typing in selections, use
the “,” to separate
individual item choices.
For example: 1002,1015.
The “-“ can be used to
choose ranges of
selectable items.
For example: 1001-1015.
You can also use both
methods in the selection
field: 1002,1004,1006-
1010.