Specifications

FX II Hardware Introduction
GCA39-824 Rev 2, Issue 4/02 Page 38 Printed in the USA
FXII
Minimum
Configuration
Maximum
Configuration
Notes
ISDN Networking
System
(1) Hub and (1) Node
Board
The Hub requires (1) Networking
board (FXNET) for every node
supported in the network
System
(1) Hub and up to (10) Nodes
Board
The Hub requires (1) Networking
board (FXNET) for every node
supported in the network
System
15C Software Required
Software activation (FXSW-NS) is
required for every system
(including the Hub) in the network
Fiber Expansion
System
One Fiber Cabinet Expansion
Fiber Kit
FXOPX-1
System
Two Fiber Cabinet expansions
Fiber Kits
FXOPX-1 and FXOPX-2
System
Each fiber expansion can be
located up to 2 Kilometers (1.2
Miles) from main cabinet.
When deploying T1/PRI in
conjunction with the Fiber
expansion option these minimum
revisions of hardware are
required:
DXOPT-SYN (Revision “D”)
FXOPT-FBM-1 (Revision “B”)
FXOPT-FBX-1 (Revision “B”)
FXINT-FSRV (Revision “C”)
FXINT-FSRV-1 (Revision “C”)
Call Records for
FXCPU-2
FXII Single Cabinet with FXPCU-
2
30,000 call records
FXII Multiple Cabinets with
FXCPU-2
200 (Standard)
FXII Single Cabinet with FXPCU-
2
60,000 call records
FXII Multiple Cabinets with
FXCPU-2
30,000 call Records
FXII Single Cabinet with FXPCU-
2
Support of 45,000 call records
requires purchase of
(FXRAMUP—2)
Support for 60,000 call records,
requires purchase of (FXRAMUP-
2) and (FXRAMUP-1)
FXII Multiple Cabinets with
FXCPU-2
Support of 15,000 call records
requires purchase of
(FXRAMUP—2)
Support for 30,000 call records,
requires purchase of (FXRAMUP-
2) and (FXRAMUP-1)
Call Records for
FXCPU-EX
200 (Standard) Not Expandable Additional call records requires
the use of FXCPU-2
ACD Support
48 Hunt Groups Standard in FXII
(Reports Optional)
ECS is a call routing solution that
comes standard with Comdial
Voice Mail (Reports Optional)
Quick Q is an ACD solution that
can be purchased separately
Part number for Hunt Group
Reports is UCDRPT. UCDRPT
requires 16A (Release 180)