Specifications

FX II Hardware Introduction
GCA39-824 Rev 2, Issue 4/02 Page 30 Printed in the USA
FX II 24 Slot System (Fiber, SCSI and Ribbon Expansion)
This configuration uses Fiber and SCSI to connect the Main Cabinet (A) to Expansion Cabinets
B and D. Then a Ribbon Cable connects Cabinet B to Cabinet C. The expansion kits are listed in
bold. There are 24 universal slots in a 4 cabinet configuration.
All board slots are 32 bit and accept either line or station boards. Using T1 or E1 line boards, as
well as the IMIST Module, can maximize the 32 bit slot capabilities.
Part Number Description
4 ea. FXCBX-II ∗
6 slot cabinet equipped for expansion (1
contained in the FXII-PK16 Package)
This part number automatically includes the proper power supply.
1 ea. FXCPU-2 Rev. P or later Enhanced CPU, Expansion Support (1
contained in the FXII-PK16 Package)
1 ea. FXSRV2-II Services board (1 contained in the FXII-
PK16 Package)
1 ea. FXINT-MAUXII Main Auxiliary board (1 contained in the
FXII-PK16 Package)
1 ea. FXOPX-1
Fiber Expansion Kit
-AND-
1 ea. FXII-EXP
SCSI Expansion Kit
-AND-
1 ea. FXII-RBNEXP
Ribbon Expansion Kit
Software must be ordered through Comdial.
1 ea. FXII-480 ∗∗
FXII 480 port alphanumeric software key
for the Main Cabinet
3 ea. FXIISW-EXP FXII Expansion Cabinet Software
Activation (for each cabinet)
∗ You may use an FXCBM-EX as the main cabinet. You would need to order an FXCNB to allow for
expansion connectivity.
∗∗ If you order a Main Cabinet Expansion Platform Package, the 480 port software is included. You then
only need to order an Expansion Cabinet Software Activation for each cabinet.