Specifications

FX II Hardware Introduction
GCA39-824 Rev 2, Issue 4/02 Page 22 Printed in the USA
FX II 18 Slot System (Fiber and SCSI Expansion)
Same cabinet topography as the last configuration, only this configuration uses Fiber and SCSI
expansion. The expansion kits are listed in bold.
All board slots are 32 bit and accept either line or station boards. Using T1 or E1 line boards, as
well as the IMIST Module, can maximize the 32 bit slot capabilities.
Part Number Description
3 ea. FXCBX-II ∗
6 slot cabinet equipped for expansion (1
contained in the FXII-PK16 Package)
This part number automatically includes the proper power supply.
1 ea. FXCPU-2 Rev. P or later Enhanced CPU, Expansion Support (1
contained in the FXII-PK16 Package)
1 ea. FXSRV2-II Services board (1 contained in the FXII-
PK16 Package)
1 ea. FXINT-MAUXII Main Auxiliary board (1 contained in the
FXII-PK16 Package)
Fiber Expansion Kit including 3 items:
FXINT-FSRV Expansion Services board
FXOPT-FBM-1 Main Fiber card
1 ea. FXOPX-1
FXOPT-FBX-1 Expansion Fiber card
SCSI Expansion Kit including 4 items:
FXINT-FSRV-1 Expansion Services board
FXOPT-SCM-1 Main SCSI card
FXOPT-SCX-1 Expansion SCSI card
1 ea. FXII-EXP
SCSI cable (6 foot length)
Software must be ordered through Comdial.
1 ea. FXII-480 ∗∗
FXII 480 port alphanumeric software key
for the Main Cabinet
2 ea. FXIISW-EXP FXII Expansion Cabinet Software
Activation (for each cabinet)
∗ You may use an FXCBM-EX as the main cabinet. You would need to order an FXCNB to allow for
expansion connectivity.
∗∗ If you order a Main Cabinet Expansion Platform Package, the 480 port software is included. You then
only need to order an Expansion Cabinet Software Activation for each cabinet.