Specifications

FX II Hardware Introduction
GCA39-824 Rev 2, Issue 4/02 Page 16 Printed in the USA
FX II 12 Slot System (Ribbon Expansion)
This configuration is different than the other two 12 slot configurations. The difference is the
expansion kit used listed in bold below. There are 12 universal slots in a 2 cabinet configuration.
Expansion Cabinet F mounts above the Main Cabinet (A) to allow for the ribbon cable
connection.
All board slots are 32 bit and accept either line or station boards. Using T1 or E1 line boards, as
well as the IMIST Module, can maximize the 32 bit slot capabilities.
Part Number Description
2 ea. FXCBX-II 6 slot cabinet equipped for expansion (1
contained in the FXII-PK16 Package)
This part number automatically includes the proper power supply.
1 ea. FXCPU-2 Rev. P or later Enhanced CPU, Expansion Support (1
contained in the FXII-PK16 Package)
1 ea. FXSRV2-II Services board (1 contained in the FXII-
PK16 Package)
1 ea. FXINT-MAUXII Main Auxiliary board (1 contained in the
FXII-PK16 Package)
Ribbon Expansion Kit including 3 items:
Main Cabinet Ribbon Connector
Expansion Cabinet Ribbon Connector
1 ea. FXII-RBNEXP
Ribbon Cable
Software must be ordered through Comdial.
1 ea. FXII-480 ∗
FXII 480 port alphanumeric software key
for the Main Cabinet
1 ea. FXIISW-EXP FXII Expansion Cabinet Software
Activation (for cabinet 2)
∗ If you order a Main Cabinet Expansion Platform Package, the 480 port software is included. You then
only need to order an Expansion Cabinet Software Activation for each cabinet.