Specifications

FX II Hardware Introduction
GCA39-824 Rev 2, Issue 4/02 Page 14 Printed in the USA
FX II 12 Slot System (Fiber Expansion)
This configuration is similar to the 12 slot SCSI expansion. The difference is the expansion kit
used listed in bold below. Fiber Expansion allows for extended distance between the Main
Cabinet (A) and Expansion Cabinet B. Use this configuration when installing the expansion
cabinet up to a mile away from the main cabinet in a campus environment or high-rise building.
There are 12 universal slots in a 2 cabinet configuration.
All board slots are 32 bit and accept either line or station boards. Using T1 or E1 line boards, as
well as the IMIST Module, can maximize the 32 bit slot capabilities.
Part Number Description
2 ea. FXCBX-II ∗
6 slot cabinet equipped for expansion (1
contained in the FXII-PK16 package)
This part number automatically includes the proper power supply.
1 ea. FXCPU-2 Rev. P or later Enhanced CPU, Expansion Support (1
contained in the FXII-PK16 Package)
1 ea. FXSRV2-II Services board (1 contained in the FXII-
PK16 Package)
1 ea. FXINT-MAUXII Main Auxiliary board (1 contained in the
FXII-PK16 Package)
Fiber Expansion Kit including 3 items:
FXINT-FSRV Expansion Services board
FXOPT-FBM-1 Main Fiber card
1 ea. FXOPX-1
FXOPT-FBX-1 Expansion Fiber card
Software must be ordered through Comdial.
1 ea. FXII-480 ∗∗
FXII 480 port alphanumeric software key
for the Main Cabinet
1 ea. FXIISW-EXP FXII Expansion Cabinet Software
Activation (for cabinet 2)
∗ You may use an FXCBM-EX as the main cabinet. You would need to order an FXCNB to allow for
expansion connectivity.
∗∗ If you order a Main Cabinet Expansion Platform Package, the 480 port software is included. You then
only need to order an Expansion Cabinet Software Activation for each cabinet.