Specifications

VMMI Programming Exercises
Printed in the USA Page 21 GCA39-082 Rev 2, Issue 9/01
Testing the Setup
Task Expected Results
1. Save the database and restore it to the system
(optional).
Your toll restriction programming changes will now be
programmed in the system and ready for you to test.
2. Plug a 25 pair cable from the IST board to the Loop
Start Line board.
This will allow you to test the Toll Restriction.
3. From any of the line appearances on the phones,
make test calls from the extensions you
programmed. If you don’t have line appearances,
use a Line Group button or dial the line group
access code
See the Results section of this exercise. If an extension
is restricted, the line will drop and you will hear re-order
tone.
This concludes the exercises.