Specifications

VMMI Programming Exercises
Printed in the USA Page 3 GCA39-082 Rev 2, Issue 9/01
Exercise Setup
Task Comments
1. Connect to the switch using VMMI:
Select the Switch drop-down menu.
Select Connect to….
User Name is Installer
Input the password: Default is I*746*
Set the Connection parameters:
DXP/Plus: 9600 Baud, Parity=None, Data Bits=8, Stop
Bits=1
FX Series: 19200 Baud, Parity=None, Data Bits=8,
Stop Bits=1
Click on Connect
2. Master Clear the system.
Select the File drop-down menu.
Select Master Clear and Select Mode 1
3. Set the System Clock:
Select the Switch drop-down menu.
Select Change System Time.