Specifications

FX II Hardware Introduction
Printed in the USA Page 5 GCA39-824 Rev 2, Issue 4/02
* 8 Dipswitches: First Bank: 1-4; Second Bank: 5-8. Only two dipswitches are functional.
They are:
Dipswitch 1: Sets the connection speed on the FXCPU board communication ports.
When dipswitch 1 is in the down position (on) the communication ports on the FXCPU
board are set as follows:
Port 1: 2400
Port 2: 9600
Dipswitch 8: Used for Master clearing the system after a software upgrade. This switch
is used during the software initialization and upgrade process of the system. When the
dipswitch is down (on), the system will Master Clear (wipe out) any previously stored
database and load a default set of parameters.
* System Reset button
* Internal Modem: Auto-detect modem (Auto-detects signals up to 19,200 BPS)
• Takes incoming CO calls only, no intercom calls. An intercom call gets a busy tone.
• Is assigned a default pilot number of 5999
• Is used for remote programming of the system
• Is programmable for Day or Night Ring
FXSRV2-II Services Board
Description
This FX II Services board is required if you plan to expand beyond 1 cabinet. It has the same
common components as the FXSRV-EX, but has enhanced capabilities that expansion requires.
FXAUX2-08 / FXAUX2-16 Auxiliary Board
Description
• This auxiliary board is only used if the customer has no desire to expand the FX II system.
You cannot expand to additional cabinets with an FXAUX2-08 or 16. However, beyond its
non-expandability, there are some definite benefits to the FXAUX2-08 or 16.