Specifications

VMMI Programming Exercises
GCA39-082 Rev 2, Issue 9/01 Page 2 Printed in the USA
Master Clear Modes
The master clear feature returns the entire system to the default operating parameters, clears all
stored speed dial numbers, and clears any other custom programming as well. The system takes
15 to 20 seconds to exercise a master clear command depending upon the system size.
You can select one of three different master clear options:
• With system mode 1 option, the system assumes a set of parameters that reflect a key system
arrangement. This means that multiline telephones, except logical station port 1 and 2,
receive direct line appearances in their button maps but have no group intercoms assigned to
their hunt lists. Logical station ports 1 and 2 have four group intercom numbers assigned to
their hunt lists and are button mapped accordingly.
• With system mode 2 option, the system assumes a set of parameters that reflect a hybrid, or
PBX-like, system arrangement. This means that multiline telephones have no direct line
appearances in their button maps; however, they do have unique group intercoms assigned to
their button maps and to their hunt lists (the DXP system assigns two group intercoms and
the DXP Plus system assigns one group intercom).
• With system mode 3 option, the system assumes a set of parameters, that does not map any
station buttons, assigns no group intercom access or personal intercom numbers to the
stations, and disables both zone and all-call paging features.