Specifications

Programming Reference Guide
GCA3A39-877, Rev 5, Issue 9/01 Page 16 Printed in the USA
Copy Station Programming
Use Copy Station Programming to program some or all stations to have the same features as
a model or source station. The programming menu provides three copy choices: Copy
Model Station, Copy Model Button Map, and Copy Phone Model.
Copy Station programming allows you to choose a “Source” station that can be copied to
selected “Destination” stations. Based on your choices, the destination stations are copied to
look identical to the source station.
The copy options listed below can be done one at a time or all together:
• Copy Model Station: The system copies all features from the source station to the
destination stations with the exception of the following items:
* Station name
* Intercom numbers
* Personal speed dial numbers
* DSS/BLF console installed
* Console port
* Alternate attendant
* Overflow attendant
* Interactive button support
* ITCM Hunt list
* Telephone model
• Copy Model Button Map: The system copies just the button mapping from the source
station to the destination stations.
• Copy Phone Model: The system copies just the telephone model type from the source
station model to compatible destination station models.
As mentioned above, to copy features, button mapping, and model type from the source
station to destination stations, you must check all three programming boxes.