Specifications

Programming Reference Guide
Printed in the USA Page 13 GCA3A39-877, Rev 5, Issue 9/01
Speed Dials
The system provides 500 system speed dial numbers by default, or 50 groups of 10 numbers
per group. Use Modify Number of Speed Dials from the Switch pull-down menu to
increase the number of system speed dials to 1000.
NOTE: When you increase the number of system speed dials you will lose all previously
programmed speed dial numbers.
See these related subjects in the main Help menu concerning Speed Dial Programming:
• Pause Time
• Dial Out Delay
• Speed Dial Groups
1. From the expanded System menu,
click on Speed Dials.
2. Highlight a Speed Dial dialing code
entry line.
3. Select Prime/Last, Itcm, Line, Line
Group, or ARS.
4. Place the cursor in Number to Dial
text box and enter number (up to 32
digits including #, *, p = pause).
5. Enter the Speed Dial Name (up to 7
digits).
6. Click when done.
[TIP] Once you create the speed dial
groups, you must assign none, one, or a
range of groups to each station class of
service on Page 1 of Class of Service
Programming.