Specifications

IMI 66-097
System Operation
Section 2
Operating The Attendant Station
Setting The System Clock
If the system has been modified to provide LCD
l
speakerphone support, the system clock can be
programmed to maintain current date and time
0
information in the display. The clock information is not
l
display&d until the feature Is programmed.
0
To set the clock,
0
l
0 press ITCM,
l dial’lk#Ol,
0
dial two digits (W-99) for year,
dial two digits (01-12) for month,
dial two digits (01-31) for day,
dial two digits (00-23) for hour,
dial two digits (00-59) for minute,
dial one diiit (l-7) for day of week (Sun.=l, Sat.=7),
press MNTR (SPKR) to end.
Programming The System Speed Dial
A special system-wide list of numbers can be
NOTE: When fw line is preselecfed and the system
programmed for automatic dialing by all users.
To program the system speed dial numbers,
press ITCM,
dial +Kc# 0 2,
dial 01 - 30 to chose storage location. Listen for
tone bursts,
0
press specific line button or ITCM button to store
line or intercom preselection if desired (optional),
0
0
l
speed dial is used, the system will
automatically pick the prime line assigned to
the station (if enabled) orpick the most
previously used line at that station.
dial the number to be stored (15 digits maximum),
* press HOLD to store pause (ii required),
l press TAP to store flash (if required),
press TRANWCONF to save number,
repeat steps 3 - 7 to store next number,
press MNTR (SPKR) to end.
Engaging The Night Transfer (of ringing)
The day, or normal, ringing of incoming lines can be
0
transferred to a particular station or stations (chosen
through class of service programming) for off -hour or
’
special-purpose answering. Additionally, stations can
be arranged through class of service programming, to
be able to answer any ringing outside line.
0
dial dc # 0 3,
press Al (top, left-hand programmable button) to
toggle feature on or oft (associated light will turn on
when night transfer is active and turn off when it is
Inactive),
press MNTR (SPKR) to end.
To enable or disable the feature,
l press ITCM.,
NOTE: when this feature is on, the ITCM fight will
flash.
Controlling The Music On Hold
Music that is provided to outside lines while they are
on hold can be disabled and enabled by attendant
action.
l press Al (top, left-hand programmable button) to
toggle feature on and off (associated light will turn
on when music on hold is provided and turn off
To turn the music on or off,
l press ITCM,
l dial +# # 0 4,
when it is disabled,
o press MNTR (SPKR) to end.