Specifications

Enter Bast
-;tiel: Press ITCM, then dial * # 7 4 6 S.
type 3 when any enabled toll
restriction is to be applied beginning
with the second digit dialed whenever
the first digit is a 9.
If the first digit is
not a 9, no restriction is applied. Such
a line type is often assigned when a
PBX or CENTREX line with a trunk
Press prog. button.
LED ON = TYPE 3
Press 46 for next feature.
Pulse/Tone Swftchable: When rotary
dial lines are installed, the user can
Press prog. button.
switch from pulse (rotary dial signals)
LED ON = TONE
to tone (Dual Tone Multiple Frequency
Press * for next feature.
signals) for accessing special circuits
requiring DTMF tones such as banking
machines. This pulse/tone
switchability must be programmed for
the line. Lines are defaulted for tone
Press prog. button.
LED ON = 50 msec.
office will send a forward disconnect
signal to the telephone system. The
fonnrard disconnect signal may be
either 50 msec. or 350 msec. in
length.
Program the system to match
Press * for next feature.
made private or nonprivate.
tn the
private mode, a station has exclusive
use of a line during a call. Lines are
rtvate unless
reprogrammed to be
Press prog. button.
LED ON = NONPRIVATE
Press * for next feature
Press G# SPKR to end programming.
,..