Specifications

Dial 15.
Press A5.
LED ON = override enabled.
Press *for next feature.
Enter Base Level: Press ITCM, then dial * # 7 4 6 c#
~~ ~~
System Speed Dial Toll Restriction
Override: This feature provides a
method for overriding toll restriction
parameters when a system speed dial
number is dialed. With this feature
enabled,
it is possible to restrict calls
to certain areas with assigned toll
restriction tables yet allow specific
numbers
in the restricted areas to be
called by storing them as system
speed dial numbers.
Automatic Pause Insertion: When
the system stores a dialed number for
later redial, it automatically stores a
pause whenever the user waits
between digits. The wait per&d is
programmable.
Dial 15.
Press prog. button Al.
LED ON = 2 Sec.
Press *for next feature.
Tone or Voice Signalllng: intercom
calls can be tone signalled or voice
signalled. The first choice in signalling
is programmable.
Dial 15.
Press A2
LED ON = TONE
Press f for next feature.
Exclusive Hold: The user can set a
hold condition whereby only the
station placing the call on hold can
retrieve it. Exclusive hold can be
disabled by programming action.
Dial 15.
Press A3.
LED ON = ENABLED
Press * for next feature.
Call Pickup System: A call can be
answered at one telephone when it is
ringing at another telephone. Call
pickup can be disabled by
programming action.
Dial 15.
Press A4.
LED ON = ENABLED
Press *for next feature.
DISABLED 1
DEFAULT =
DISABLED
BUlTON Al
Al
TIMF 750Msec 7sec
FNTRY
1 DEFAULT = 2 SEC.
I
PROGRAMMING NOTE: All features described on this page can be
programmed after d/a/in9 15 once. Just press the program
button for each feature to be programmed*
Press + SPKR to end programming.
c