Specifications

Enter Base Level: Press ITCM, then dial m # 7 4 6 *.
Assign Restriction To Lines: Lines
must be programmed to accept toll
restriction before the restriction that is
assigned to the stations will take
effect.
bssign Restrictions To Stations:
Station dialing can be restricted with
t/O toil restriction and with deny/allow
oil table restriction. Either method
:an be assigned to restrict station
dialing on a per station basis. Both
nethods can be assigned at the same
ime if that .arrangement is desired.
41~0, 1+7-digit dialing can be allowed
vhen needed. When 1+7-digit dialing
s allowed, the l/O restriction must also
)8 assigned.
Dial 36.
Press prog. buttons to assign
restriction to lines
Press * for next feature
Dial 62.
Dial port ID (10-33).
- Select l/O toil restriction.
l Press Al
- Select l-7digit allow, only
if needed. Note that,
l/O restriction must also
be selected .
l Press Al, A2
- Select deny/allow toil table
restriction (if required and
programmed).
l Press A3. Note that l/O
or l/O and l+‘ldigit
restriction can also
be selected if desired by
pressing:
l Al,A3wAl,A2,A3
Dial # + PORT ID for next sta.
OR
Press * for next feature.
Press #? SPKR to end programming.