Specifications

Programming instructions
IMI 66-097
Programming Telephones
Perform ail programming at station port 40 by dialing
special codes and pressing special buttons as detailed
in this chapter. Figure 4-l illustrates the button
locations for applicable telephone models. Figure 4-2
shows a block diagram illustration of button features.
Comdiai recommends that you use a 14-line monitor
telephone (such as product code 6714X) for
programming since it provides ail needed program
buttons and LED indicators for program status
feedback.
Comdiai does not recommend the 6-line monitor
telephone (product code 6706X) for programming
unless ail of the installed system telephones are
product code 6706X telephones. ff you do use this
telephone for programming, you must take the
following special considerations:
l Program button B’i equals button A5 and program
button B2 equals button Al2 for ail COS
programming requirements except button mapping.
When button mapping Bl and B2 with a line
assignment that is represented by A5 (line 5) or by
Al 2 (line 12) press Bl or B2 twice. The first press
represents the button location. The second press
represent the line assignment.
l The product code 6706X telephone cannot
represent program buttons A6 and Al 3; therefore, ft
should not be used for programming if other
telephones in the system have designated A6 and
Al3 buttons that require mapping.
You can program with a product code 6700s LCD
speakerphone if you wish. With this telephone, the
display shows the name of each class of service
feature as it is being programmed. This telephone
cannot represent program buttons A6 and Al 3;
therefore, it should not be used for programming if
other telephones in the system have designated A6
and Al3 buttons that require mapping.
You can atways program with an ExecuTech LCD
speakerphone (product code 6600E-xx). With this
telephone, the display shows the name of each class
of service feature as it is being programmed and ft
provides all required programming buttons.
Programming can also be performed with ExecuTech
muftiiine telephones (such as models 6614E, 6614T,
6620E or 662OT).
Programming overlays for ail applicable tefephone
models are included at the end of this chapter.