Specifications

Enter Base Level: Press ITCM, then dial +k # 7 4 6 +K.
Tone:Choose the type of
a station that is busy
n an outside line. Either select a
efaulted to provide a ring-back tone.
Flexible Toll Restriction: Restricts
stations from dialing a range of
number combinations while allowing
specific exceptions. The restrictions
are specified by entries on a deny
table while the exceptions are
specified by entries on an allow table.
These programmed tables must be
assigned on a per station basis before
the restrictions can take effect.
-Maximum of 8 digits per entry.
-Allow entries override deny entries.
-Default settings for allow and deny
entries are listed in the tables on page
4-8A.
Note: You can not specify deny and
allow entries on the same table.
You
must assign separate tables for allow
and deny entries,
Assign the restriction to the lines and
stations per the instructions on page
4-9.
Dial 15.
Press A8.
LED ON = Busy Tone
Dial 14.
Select table, Al -A5, A&Al 0
-Al =
ENTRY 1
- A2 = ENTRY 2
-A3= ENTRY 3
-A4= ENTRY 4
- A5 = ENTRY 5
- A8 = ENTRY 8
-A9= ENTRY 7
- A10 = ENTRY 8
- Al 1 = Establish allow table
- Al2 = Establish deny table
Dial number.
(# = match anything digit.)
Select next table, and repeat.
Press +I6 for next feature.
RING-BACK 1
BUSY TONE1
DEFAULT = RING-BACK
TYPICAL EXAMPLE
Press Y SPKR to end programming.