Specifications

Enter Base Level: Press ITCM, then dial * # 7 4 6 *.
System Speed Dial Toil Restriction
Override: This feature provides a
method for overriding toil restriction
parameters when a system speed dial
number is dialed. With this feature
enabled,
it is possible to restrict calls
to certain areas with assigned toil
restriction
tables yet allow specific
numbers
in the restricted areas to be
called by storing them as system
speed dial numbers.
Dial 15.
Press AS.
LED ON = override enabled.
Press 46 for next feature.
Automatic Pause insertion: When
the system stores a dialed number for
later redial, it automatically stores a
pause whenever the user waits
between digits. The wait period is
programmable.
Dial 15.
Press prog. button Al.
LED ON = 2 Sec.
Press % for next feature.
Tone or Voice Signailing: intercom
calls can be tone signailed or voice
signailed. The first choice in signailing
is programmable.
Dial 15.
Press A2
LED ON = TONE
‘Press
* for next feature.
Exciusive Hold: The user can set a
hold condition whereby only the
station placing the call on hold can
retrieve it. Exclusive hold can be
disabled by programming action.
Dial 15.
Press A3.
LED ON = ENABLED
Press 8 for next feature.
Call Pickup System: A call can be
answered at one telephone when it is
ringing at another telephone. Calf
pickup can be disabled by
programming action.
Dial 15.
Press A4
LED ON = ENABLED
Press * for next feature.
PROGRAMMING NOTE: All features described on this page can be
programmed after dialing 15 once. Just press rhe program
budton for each feature to be programmed.
.
I
Press + SPKR to end programming.
I-