Specifications

P
CLASS OF SERVICE PROGRAMMING CHART
FOR ExecuTech XE KEY SYSTEM
The ExecuTech XE key systems are
preprogrammed to a user-oriented set of
operational parameters or class of service known
as the default values. In many cases, this default
class of service will provide operating conditions
that are completely acceptable to the end-user’s
needs. This means that the system is completely
operational as soon as it is installed and power is
applied.
On occasions where the default settings do not fit
the end-user’s needs, the system can be
re-programmed to change the class of service to
meet local requirements. This programming chart
is used to first plan the required changes and then
to implement them.
To program a system,
o Enter base level: ITCM S # 7 4 6 +E
Q (Optlonal step) Master Clear: Dial 65, press Al2,
dial 7 0 5 1 6 8 4.
This step clears all memory entries,
hcluding any previously programmed
autodial numbers, and returns system to
start-up default.
e Mark the desired selections in the charts below to
record programming needs.
o Dial feature code.
MOTE: Current program setting is indicated by
lighted L EDs next to applicable
progamming key. When a toggle action
is provided by a singfe key, the lighted
LED indicates that the feature is active.
c Press A-field key to choose new programming.
e Press i(c to return to base level for next feature.
-OR-
l Press +# SPKR to end programming.
AI
A3
A0
A0
AS
AI0
A4
All
A6
AI3
AI3
Ad
6702X
6706X
AI
A3
A3
A4
04
da
“I
AI
*,
A,
*I
1‘
A,
BI
I
”
/ I \
I
B,
662:
.J
- II
_ A,
- “I,
- *,I
- A,,
- A,,
- .A,4
- 1,s
- ,,
- ,s
01-J
6714X
Lao
.
i