Specifications

Maintenance
c
IMI 66-031
‘
Default conditions can be reset,
the following instructions.
whenever the system is operating, per
1. Press the
0
lTCM key.
2.
Press the following keys:
c*n>~~~@TJ@J~@)
3.
Press the
0
MONITOR
key.
The following system default conditions are set:
-All lines are DTMF
-Voice signalling
attempted first when intercom call is made
-1 sec. pause time
-2 sec. dial tone recall time
-30 sec.
recall from hold
-All lines private
-All lines are CO lines
-No toll restriction set
-300 msec. held call abandon time
-No ringing line preference enabled
-No prime line is chosen
-DSS/BLF port is disabled
-PA port is disabled
-No delayed ringing enabled
-No access denied
-No origination denied
-No automatic privacy released
-Day and night ringing patterns set as follows:
-station 10,
17, and 24 all lines
-System-wide,
all call paging in zone D
-Printer port set for 110 baud data rate
-Line select buttons l-n selects lines l-n (squared pairing)
‘7
74