Specifications

IMI 66-031 ’
Programming
Table 2b.
LINE COS
PROGRAMMING REFERENCE
PROCEDURE RECORD
(Shading Denotes System Default Values)
I
NOTE
Enter the informatlon in thr box at right beforo parforming
the programmlng procedures given below.
NOTE
l Chsck oath line number block for the Iine teature that b set.
0 Write In the calling number and tocatton status
1. Base love1 program entry
a. press [INTERCOM]
b. press m
2 press q (SET ALL LINES PRIVATE)
3. Press [LINE sf3Ec-rj i-a (SET NON-PRIVATE LINES)
4. Press q
5. Press [LINE SELECTI
6. press q (DISABLED LINE)
q (AUXIL LINE)
q (TELCO LINE)
q (PBX LINE)
7. Select toll restrlctlon tables
-Press memory features dlallng buttons
a selects table 1
a selects table 2
a selects table 3
a through a selects tables 4 through 8
RESTRICTION
8. Press
q (PULSE/TONE DIALING) &I.CIOM ferrun
Press q (TONE ONLY DIALING)
3
ku IhG kmy
0. press q (HOLD ABANDON SOms) soktorn wun
press q (HOLD ABANDON 3OOms) maw koy
3
10. Repeat steps 5 through 0 for arch Ilne
11. Press q
CALLING NO.
12 press IVoNlToRJ
NOTE
If a time out occurs durtng the prognmmtng sequence,
perlorm base kvel entry agaln and proceed at program step
2 or4
I
66