Specifications

Programming
IMI 66-031
.
F“
10. Set the
w for each line.
a.
A tone burst will sound.
A default
condition o access not denied will be set on all lines.
b.
Press the line select key for each line on which access is to
be denied. A tone burst will sound after each selection.
11. Set the m &&J&&Q dgnigd && for each line.
a.
A tone burst will sound.
A default
origination not denied will be set on all
lines.
b.
Press the line select key for each line on which call
origination is to be denied.
A tone burst will sound after
each selection.
12. Set the m & mj6; May r9lgae for each line.
Qk
6
M
a.
Press the 8 ey.
A tone burst will sound.
A default
condition o
no access to automatic privacy release will be
set on all lines.
b.
Press the line select key for each line on which access to
p
automatic privacy release is desired.
A tone burst will sound
after each selection.
13. Set the Q&J&+ w for each line.
a.
A tone burst will sound.
A default
condition of no night ringing will be set on all lines.
b.
Press the line select key for each line on which night ringing
is desired.
A tone burst will sound after each selection.
14. Set the &&&&a &&j m J&J&J eagabili$y for the station. The
system default value fixes all call at all stations in the system.
a.
A tone burst will sound. This action
from zones A, B, and C.
b.
is desired to clear the station from all-call, press the
c.
To assign reception by zone:
r-
1.
Press line select key 1 for zone A
2. Press line select key 2 for zone B
;:
Press line select key 3 for zone C.
Press line select key 4 for all-call
(if it was cleared in step b).
63