Specifications

Programming
IMI 66-031
’
-All lines either DTMF or Pulse/Tone switchable (per step 2b.)
-Voice signalling attempted first when intercom call is made
-1 sec. pause time
-2 sec. dial tone recall time
-30 sec.
recall from hold
-All lines private
-All lines are CO lines
-No toll restriction set
-300 msec. held call abandon time
-No ringing line preference enabled
-No prime line is chosen
-DSS/BLF port is disabled
-PA port is disabled
-No delayed ringing enabled
-No access denied
-No origination denied
-No automatic privacy released
-Day and night ringing patterns set as follows:
-station 10,
17, and 24 all lines
-System-wide,
all call paging in zone D
-Printer port set for 110 baud data rate
-Line select keys l-n selects lines l-n (squared
pairing)
3. Select the $y@ a &m &Q&&&J~ that is first performed
when an intercom call is placed.
0
0
0 a.
0
0
0
0
0
0
0
Oyb*
LO 171 WI
If tone signalling should be
performed first, press memory
key 13.
If voice signalling should be
performed first, press memory
key 14.
c. Press the
0
*?
s
key on the key pad.
55