Specifications

Operation
IMI 66-031
a,
RINGING LINE PREFERENCE
The system programming can be performed to enable a ringing line
preference feature at a station.
If enabled,
an audibly ringing line
(either outside or intercom) will be automatically answered when the
station handset is lifted or the
0
MONITOR
key is pressed on a
speakerphone.
Neither the line select key nor the
0
ITCM
key will
have to be pressed to connect to the ringing line.
DIALING 0 FOR ATTENDANT
When a user presses the lTCM
0
key and then presses the
0
0
ii
key, an
intercom call is automatically made to station 10. This feature
allows a station user to call the system attendant using a familiar
method (i.e.:
dialing 0 for the operator).
OPTIONAL FEATURES OPERATION
SPEAKERPHONE OPERATION
To originate a speakerphone call,
the user must select an idle line
and dial the desired number.
When the called party answers a
handsfree conversation can begin. The user must press the
0
key
,-\
to end the call.
MONITOR
To answer a speakerphone call,
the user must press the line select key
of the ringing line and speak in a normal tone of voice toward the
station.
The audio volume level is adjustable with the volume control
that is located on the faceplate.
The user must press the
0
key
to end the call.
MONITOR
During a conversation a user may switch from handset operation to
speakerphone operation and back again as follows:
Handset To Speakerphone
1.
Press the
0
MONITOR
key (note that the indicator turns on), and
return the handset to ‘the cradle.
2. Continue the conversation in a handsfree mode using the
speakerphone.
3.
Hang up when the call is finished by pressing the
0
MONITOR
key
again (note that the indicator turns off).
46