Specifications

Operation IMI 66-031
2.
Lift the handset, press the
0
ITCM
key,
and then press the keypad
kev which corresoonds to the zone to be called.
--
Key
selects zone A
Key{5 i)selects
zone B
Key(6 z)selects zone C
Key
0
7
P
D
selects system-wide all call (Unless your telephone
system is programmed to provide a zone D instead)
3.
Announce the message,
and hang up the handset.
HINT: Store the calling sequence ( ITCM
KEY ) at a memory key
location,
and use the automatic dial feature to provide one-key access
to the all call and zone paging feature.
DIRECT STATION SELECT (DSS) INTERCOM
The system has a Fixed DSS feature built into it.
The feature allows
a user to make a voice signalled intercom call to certain stations
without having to first store the numbers.
Stations 12 through 25 can
be called using memory keys 1 through 14.
TO use Fixed DSS, the user must press the
0
ITCM
key,
and then press a
memory key..
(The station key locations begin with the top left
location
, proceed down that column,
and continues with the top of the
right column.)
Any currently active call is automatically placed on
hold, and an intercom call is placed to the selected station.
The
type of signalling first attempted is dependent upon COS programming'
but the handset must be lifted to enable voice signalling (even with a
speakerphone).
Otherwise,
tone signalling is enabled.
3
When a user is required'to answer and announce a high volume of calls,
Programmed
DSS may be advantageous because a selection need not be
prefixed by pressing the ,TCM key.
0
Store an intercom line selection
;zzi;;sand a station number at those memory key locations to be used
l
(Refer to the paragraph headed aa~ J@ &J&!$ &a& m &
&$Q$Q QJ& mE;R for number storing instructions.)
To use Programmed DSS,
simply press .a DSS memory key.
Any currently
active outside call will be automatically placed on hold, and an
intercom call will be placed.
The type of signalling first attempted
is dependent upon COS programming but the handset must be lifted to
enable a voice signalling (even with a speakerphone).
Otherwise, tone
z
signalling is enabled.
44