Specifications

ManualsBrandsComdial ManualsConsumer electronicsExecuTech 0816 Series

Operation

IMI 66-031

;

Press a memory key.

A station will automatically turn on the

monitor speaker;

select a line (programmed as part of the number,

the station prime line, or the last active line): and dial the

number.

Listen for an answer or a busy tone. Pick up the handset to

complete an answered call.

key to terminate a

busy or unanswered call.

Press the YIOFl,TOR

SneednialQ~~tian

Press the keypad key corresponding to the desired number. A

station will automatically turn on the monitor speaker; select a

line (stored as part of the number, the station prime line, or the

last active line):

and dial the number.

NOTE

The keypad always exists, at idle, as an automatic line

select speed dialer.

If a line select key is pressed to

select a line,

the station converts the keypad to a manual

dialing mode.

Therefore,

to avoid the need to manually dial

a number after manually selecting a line, the user

must

c:;;Frt

the keypad back into a speed dialer by pressing the

key.

HOLD

Listen for an answer or a busy tone.

Pick up the handset to

complete an answered call.

Press the

MONITOR

key to terminate a

busy or unanswered call.

SPEED DIALING (SYSTEM)

The system can have speed dial numbers stored which can be accessed by

any station in the system.

The system manager determines what numbers

are available with this feature.

The user can employ this feature per

the following procedure.

1 . .

Press the

key on the keypad and immediately press the keypad

key corresponding to the desired number.

A station will

automatically turn on the monitor speaker: select a line (stored

as part of the number,

the station prime line, or the last active

line);