Specifications

Operation
IMI 66-031
',
i
ADD-ON CONFERENCE/PRIVACY RELEASE .
Once a station connects to a line in a private mode, all other
stations are excluded from connecting to it.
A user can add other
stations to that line as follows:
1.
Place the call on hold, and use the intercom feature to invite an
additional station to join the line.
2.
Press and hold the line select key on the first station.
This
makes the line non-secure.
The user of the second station must
press the same line select key to join the line.
3.
Release the line select key after the other station has joined the
:
conversation to return the line to a private condition for both
stations.
FEATURES OPERATION
LAST NUMBER REDIAL
A station is equipped with a last number redial feature, it may be
used to repeat the last number manually dialed from the dial pad. A
station user may employ the feature as follows:
1. Press the
0
#
B
monitor speaker,
key.
The station will automatically turn on the
select the station prime line, if available, or
-7
the last active line,
and will dial the last number (up to 31
digits) that was dialed from the keypad.
NOTE
The keypad always exists, at idle, as an automatic line
select speed dialer.
If a line select key is pressed to
select a line,
the station converts the keypad to a manual
dialing mode.
Therefore,
to avoid the need to manually dial
a number after manually selecting a line, the user must
SHIFT
convert the keypad back into a speed dialer by pressing
the
key.
0
HOLD
2.
Listen for an answer or a busy tone. up the handset to
complete an answered call.
key to terminate a
busy or unanswered call.
SAVED NUMBER REDIAL
The %VE
0
key can be used to store the last number manually dialed
from the keypad.
After the number is dialed and before any other
numbers are dialed,
the user can press the m
key to cause the
last manually dialed number to be stored for later recall.
This
number remains stored until replaced by another one.
This action can
be taken while the station is either on-hook or off-hook. To dial
using the saved last number feature, the user must do as follows:
38