Specifications

Operation
IMI 66-031
Establish the conference per the following steps:
a.
Press and hold the line select key of the second call.
b.
Press the line select key of the first call.
C.
Release both line select keys.
Both lines are now connected to the same station in a conference call.
4.
5.
6.
7,
The user can selectively disconnect one member of the conference
call while saving the other by pressing the line select key of the
line to be saved.
The other line will automatically be
disconnected.
The user may hold conferenced lines and use other telephone
features.
The conference call can be re-established per step 3,
above.
Other stations may be added to the conference call by placing the
conferenced line on hold and then releasing privacy.
Refer to the
paragraph titled m m mu &$,&&Jja for details.
End the conference call by hanging up.
AUTOMATIC PRIVACY
A station can be programmed to operate in a normally private or a
non-private mode.
This feature can be programmed on a per line basis.
The system manager determines station features.
The private mode, when programmed,
allows exclusive use of an active.
line.
NO other station can connect to an active line unless the
add-on conferencing feature described below is used.
In the non-private mode, when it is programmed, several stations in
the system can connect to a line at one time.
When a station is
connected to a line,
other stations can also connect to it.
Another
station user may connect to a line by pressing the line select key on
their station.
The resulting conference is referred to as common line
pick up.
37