Specifications

Installation
19.25 INCHES
hNElEr----i
o-
I
-a-
l
Figure 1.
KSU Mounting
W&&Wi%&&&Qtina
Place the individual telephone stations as
accepted industry and office standards.
.
IMI 66-031 ;
_
Dimensions
desired and in keeping with
A station can
be wall mounted if necessary.
Use a wall mounting
bracket (part number 701032-056) for this purpose.
CABLE ROUTING
Cable may be routed concealed or visible as the installation location
requires.
Good engineering practices must be observed and all
applicable building codes must be adhered to.
l
a
The maximum distance allowed from the KSU to the station is 1500
feet using t24 gauge, twisted-pair cable.
The allowed tip/ring loop resistance is 1900 ohms from the jack to
the TELCO/PABX equipment.
20