Specifications

Introduction
&
.._
IMI 66-031
SECTION 2
INSTALLER/USER INFORMATION
REGARDING FCC RULES AND REGULATIONS
This electronic key system complies with Federal Communications
Commission (FCC) Rules, Part 68.
The FCC registration label on the KSU contains the FCC registration
number, the ringer equivalence number, the model number, and the
serial number or production date of the system.
NOTIFICATION TO TELEPHONE COMPANY
Unless the telephone operating company provides and installs the
system, the telephone operating company must be notified before a
connection is made.
The lines (telephone numbers) involved, the FCC
registration number,
and the ringer equivalence must be provided to
the telephone company.
The FCC registration number and the ringer
equivalence number of this equipment are provided on the label
attached to the KSU.
The user is required to notify the telephone company when final
disconnection of this equipment from the telephone company line
occurs.
COMPATIBILITY WITH TELEPHONE NETWORK
When necessary,
the telephone operating company provides information
on the maximum number of telephones or ringers that can be connected
to one line,
as well as any other applicable technical information.
The telephone operating company can temporarily discontinue service .
and make changes which could effect the operation of your equipment*
They must,
however, provide adequate notice, in writing, of any future
equipment changes that would make the system incompatible.
INSTALLATION REQUIREMENTS
Connection of the electronic key system to the telephone lines must be
through universal service order code (USOC) outlet jacks supplied by
the telephone operating company.
If the installation site does not
have the proper outlets,
ask the telephone company business office to
install new outlets or adapters for the present ones.
The correct
outlet jacks for this system are type RJllC or RJ12C jacks.
15