Specifications

IMI 66-031 ‘
IMI 66-031 ‘.
1
mbsf(eus,SneedDialL .- _
lrammable.memory dialing features available
These memory keys can be programmed to
.c dialing purposes.
The stored numbers can
lth and can include line or intercom
', pauses, and flash signals. A pause is
key is pressed,
and a flash signal is stored
.s pressed.
The pause and flash intervals
,tely,
memory location 14 can provide
.ing of the last number dialed if a memory
tat location.
ghen it is actuated. Th
Itions with a programmed
sting a non-electronic
. 2500. This voice pair
thenever there is an AC
lg on this power failure
condition.
The power
:t as soon as power is
is
iS
lmmed to provide 10 speed dial numbers at the ’
.umbers can be up to 150digits in length and
ntercom selection, numbers, Q'S, *'s,
ddition to the station speed dial numbers,
numbers are available at the keypad keys.
lower on indication and
ers can be up to 31 digits in length, and
,mation as described above. %ystem speed
be done at station 10.
mixture of 3-line and 8-line telephone
can be standard,
handsfree stations or full
I
all other stations are
line unless that station
ws a station user to
ions can be added to an
ly interconnected by employing industry
and modular plug/jack combinations.
-conductor,
twisted-pair cable throughout
tary contact, press and release types.
11 monitoring,
They
and other feature selection.
eature selection is provided by built-in
s) l
lection and a station
DSS memory key.
When this
tomatically placed on hold
atically made to that
llow one or more stations to access two
time resulting in a multipath conversation.
distant parties'
stations is dependent upon
lines. If more than one internal station
8
the voice levels may be lower than when a
involved.
I
xtory.
This director
ial and station speed
3
ial
4sis to allow the stations
needed.
Alternately, the I
:one dialing.
9