User guide

MUTE / HANDSFREE ANSWER INHIBIT
The MUTE button is in a non-latching mode when the
station handset is lifted and in a latching mode when
the station is operated in a handsfree manner.
To prevent distant party from hearing while
handset is lifted,
•
Press and hold MUTE. Speaker light will flash.
To resume two-way conversation,
•
Release MUTE. Speaker light will turn off.
To inhibit handsfree answer of intercom calls,
•
Press and latch MUTE. Speaker light will flutter.
To enable handsfree answer of intercom calls,
•
Press and release MUTE. Speaker light will turn off.
PULSE/TONE SWITCHING
If the local telephone service is pulse (rotary) but
tone generation is required during the call, convert
to tone while dialing as follows:
•
Press # at point in dialing sequence where
conversion to tone is required. (System will switch
back to pulse dialing when call is ended.)
NOTE: Pulse/Tone switching can be stored at a
programmable button by pressing # during
number storage.
PERSONAL RINGING TONES
A station user can select one of four different ringing
tones for use at a station.
•
Press ITCM SS.
•
Dial 4.
•
Dial 1, 2, 3,or4 (selects tones 1, 2, 3, or 4).
FREQUENCY WARBLE
TONE PAIR RATE
TONE 1 509/610 Hz 10 Hz
TONE 2 763/1016 Hz 10 Hz
TONE 3 509/610 Hz 19 Hz
TONE 4 763/1016 Hz 19 Hz
BACKGROUND MUSIC
Music must be supplied by the system before it can be
turned on at a telephone. Background music, when
supplied, automatically turns off during calls.
To turn music on,
•
Press ITCM.
•
Dial S 1. (SPKR light will turn on.)
•
Adjust loudness of music with call monitor speaker
volume control.
To turn music off,
•
Press ITCM.
•
Dial # 1. (SPKR light will turn off.)
System Description IMI 66-064
5-7