User guide

LINE MONITORING
To activate while on a call,
•
Press MNTR (SPKR). Monitor light will turn on.
•
Hang up handset.
NOTE: If a distant party places the call on hold, the
station user can monitor in a handsfree
manner until the party returns, and then lift the
station handset to resume the call.
To cancel,
•
Lift handset to resume conversation
-OR-
•
Press MNTR (SPKR) to disconnect. Monitor light
will turn off.
RECALL/FLASH
FLASH
PBX, CENTREX and custom calling services may
require this feature.
If a system has been configured for flash,
•
Press TAP to generate a timed flash signal.
RECALL
This feature provides disconnect and dial tone recall.
If a system has been configured for recall,
•
Press TAP to disconnect current call and receive a
new dial tone for another call.
NOTE: A system can be configured for either flash or
recall but not for both.
PAGING
EXTERNAL PAGING
(Requires external paging unit)
•
Press line button dedicated to paging.
ALL-CALL AND ZONE PAGING
To page,
•
Lift handset.
•
Press ITCM.
•
Dial zone number - (4, 5, 6,or7 for all-call).
•
Make announcement.
•
Hang up handset or wait on line for an answer.
DO NOT DISTURB
To silence a station ringer and appear busy to
intercom calls,
•
Press MNTR (SPKR). (Associated light will turn on).
NOTE: The calling party will hear two quick tone bursts
every three seconds. The feature cannot be
overridden by the calling party.
To cancel,
•
Press MNTR (SPKR) again. (Associated light will
turn off.)
IMI 66-064 System Description
5-6