User guide

CONFERENCING
Conference transmission levels are not compensated
and are dependent upon the quality of the external
lines.
MULTILINE CONFERENCE
(2 external parties, 1 internal party)
To set up a multiline conference,
•
Establish first outside call. (Do not press HOLD.)
•
Press TRANS/CONF. (Outside call is placed on
hold automatically.)
•
Establish second outside call. (Do not press HOLD.)
•
Press TRANS/CONF. Conference is established.
To drop one conferee and remain active in
conference with other conferee,
•
Press HOLD. Both lines placed on hold.
•
Press line key of party to be dropped.
•
Press and release hookswitch.
•
Press line key of party to be retained.
•
Resume conversation.
ADD-ON CONFERENCE
(1 external party, 2 internal parties)
•
Establish outside call.
•
Press TRANS/CONF (outside call placed on hold
automatically).
•
Dial extension number of intercom party.
•
Wait for answer.
•
Press TRANS/CONF (a three-way connection is
established).
MESSAGING
MESSAGE WAITING CONTROL
The message waiting light at any telephone can be
turned from another telephone to alert the user that a
message awaits pickup.
To turn on MW light,
•
Press ITCM.
•
Dial S 3.
•
Dial extension number of station to be alerted. (The
MW light of called station will flash.)
To turn off MW light,
•
Press ITCM.
•
Dial #3.
•
Dial extension number of station that was alerted.
(The MW light of called station will turn off.)
To turn off MW light while delivering message,
•
Press HOLD.
To receive message at an alerted station,
•
Observe flashing MW light.
•
Lift handset.
•
Press ITCM HOLD.
•
Connection to message depositor is automatic.
VOICE ANNOUNCE BLOCKING
To block voice calls,
•
Press ITCM.
•
Dial S 2.
•
Hang up.
To un-block voice calls,
•
Press ITCM.
•
Dial # 2.
•
Hang up.
System Description IMI 66-064
5-5