User guide

System Description IMI 66-064
CHAPTER 1
SYSTEM DESCRIPTION
SECTION 1
INTRODUCTION
MANUAL SCOPE
This publication contains a complete description of the
ExecuTech model XE electronic key system. The
manual is divided into:
•
System Description
•
Feature Description
•
Installation
•
System Programming
•
System Operation
•
Maintenance
This issue of publication IMI 66-064 supersedes all
previous issues and includes information previously
discussed in the following Technical Advisory Bulletins:
TAB036A - Software Enhancements
N0308 Revision C and later
N0616 Revision C and later
N0820 Revision D and later
N1024 Revision D and later
•
Automatic dialing with DSS/BLF consoles
•
OHVA and DSS/BLF with DB32S-xx adjunct feature
module
•
OHVA signaling enhancements
•
Unscreened call transfer
•
Extended DTMF tones
•
Idle line preference through an OPX port
•
Auto-save feature
TAB047 - Programming Clarifications
All models, all revisions
•
Expanded explanation of line assignment and button
mapping
TAB048A- Software Enhancements
N0308 Revision H and later
N0616 Revision H and later
N0820 Revision K and later
N1024 Revision K and later
•
System speed dial toll restriction override
•
SOHVA groups
TAB059A-Software Enhancement
N0308 REV J and later Software Issue 8
N0308-AT REV J and later Software Issue 8
N0616 REV J and later Software Issue 8
N0616-AT REV J and later Software Issue 8
N0820 REV M and later Software Issue 11
N0820-AT REV M and later Software Issue 11
N1024 REV M and later Software Issue 11
N1024-AT REV M and later Software Issue 11
K0308 REV J and later Software Issue 8
K0616 REV J and later Software Issue 8
K0820 REV M and later Software Issue 11
K1024 REV M and later Software Issue 11
Product codes for software upgrade kits:
PSUXE-1 REV 8
NO308, N0308-AT, NO616, N0616-AT, K0308, K0616
PSUXE-2 REV 11
NO820, N0820-AT, N1024, N1024-AT, K0820, K1024
•
Programmable Feed-Back Tone
RELATED PUBLICATIONS
Related publications, which contain additional
information applicable to this electronic key system, are
available from the manufacturer.
They are as follows:
GENERAL INFORMATION
•
IMI 01-001 Compliance Requirements To FCC Rules
and Regulations Part 68 and 15
•
IMI 01-005 Handling Of Electrostatically Sensitive
Components
USER INFORMATION
•
GCA 70-110 Attendant Guide
•
GCA 70-111 Station User Guide
INSTALLER INFORMATION
•
IMI 66-065 Class Of Service Programming Chart
1-1