Specifications

IMI 66-064
System Operation
NOTE: An autodial number can also be programmed as a
secundary function at every DSS/BLF memory
location. See Automatic Dialing instructions for
de tails.
To voice call a DSS number,
l Lift handset.
l Press softkey.
l Voice announce.
NOTE: When transferring a call, the outside line is auto-
matically placed on hold when a DSS key is
pressed.
To tone call a DSS number,
l Lift handset.
l Press softkey.
l Press ITCM. When intercom party answers, two-way
conversation can take place.
NOTE: The lights (LEDs) adjacent to softkeys indicate
status of DSS telephones:
l DARK indicates idle te/ephone
l STEADY-ON indicates telephone in use
l FL&$HlNG indicates another station is calling this
TRANSFERRING OUTSIDE CALLS
l Answer outside call.
l Press T/C. (Outside call is placed on hold automat-
ically.)
l Dial extension number of party to be transferred to.
l When intercom party answers, announce call and
line number.
l Hang up handset.
To return to outside call (busy or no answer),
l Press flashing line key.
CONFERENCE CALLS
Conference transmission levels are not compensated
and are dependent upon the quality of the external lines.
Multiline conference (2 external parties, 1 internal
wW
To set up a multiline conference,
l Establish first outside call and press T/C.
l Establish second outside call and press T/C.
To drop one conferee and remain active in con-
ference with other conferee,
l Press HOLD. Both lines placed on hold.
l Press line key of party to be dropped.
l Press and release hookswitch.
l Press line key of party to be retained.
l Resume conversation.
Alternately, remain on line while one conferee hangs up.
Add-on conference (1 external party, 2 internal par-
ties)
l Establish outside call.
l Press T/C (outside call placed on hold automatically).
l Dial extension number.of intercom party.
l Wait for answer.
l Press T/C (a three-way connection is established}.
5-2