Specifications

Enter Base Level: Press ITCM, then dial t # 2 3 6 %.
I
Pulse/Tone Switchable: When rotary
dial lines are installed, the user can
switch from pulse (rotary dial signals)
to tone (Dual Tone Multiple Frequency
signals) for accessing special circuits
requiring DTMF tones such as banking
machines. This pulse/tone switchability
must be programmed for the line.
Lines are defaulted for tone signalling
only.
Abandoned Hold Release: When a
distant party abandons a hold condition
and disconnects, the central office will
send a forward disconnect signal to the
key system. The forward disconnect
signal may be either 50 msec. or 350
msec. in length. Program the system
to match the central off ice time.
Automatic Privacy: A line can be
made private or non-private. In the
private mode, a station has exclusive
use of a line during a call. Lines are
private unless re-programmed to be
non-private.
Dial 36.
Press prog. key.
LED ON = TONE
Press * for next feature.
Dial 37.
Press prog. key.
LED ON = 50 msec.
Press * for next feature.
Dial 36.
Press prog. key.
LED ON = NON-PRIVATE
Press * for next feature
,I
Press 4c SPKR to end programmmg.