Specifications

Enter Base Level: Press ITCM, then dial J # 7 4 6 *.
Line Disabled: A line can be taken out
of service because of line defect or
other reason.
Auxiliary Line: A line can be
conditioned to serve as a port for an
external paging amplifier
Line Type 1: A line port is assigned as
type 1 when any enabled toil restriction
is to be applied with the first digit
dialed. Such a line type is often
assigned when a CO line is connected.
Line Type 2: A line port is assigned as
type 2 when any enabled toil restriction
is to be applied beginning with the
second digit dialed. Such a line type is
often assigned when a PBX or
CENTREX line with any trunk access
code is connected.
Line Type 3: A line port is assigned as
type 3 when any enabled toil restriction
is to be applied beginning with the
second digit dialed whenever that digit
is a 9. if that digit is not a 9, no
restriction is applied. Such a line type
is often assigned when a PBX or
CENTREX line with a trunk access
code of 9 is connected.
Dial 30.
Press prog. key.
Press * for next feature.
Dial 31.
Press prog. key.
Press * for next feature.
Dial 32.
Press prog. key.
Press * for next feature.
Dial 33.
Press prog. key.
Press % for next feature.
Dial 34
Press prog. key.
Press * for next feature.
I
Press +k SPKR to end programming.
I