Specifications

LinkPlus Interface Guide: Comdial DXP/DX/FX System

PN: 1725-36132-001_E.doc

Station features for handset

Program the following features for the handsets:

• Prime Line: Selects the line that users get when they go off-hook.

To give users an inside dial tone when they go off-hook, assign

Intercom as Prime Line.

• Ringing Line Preference: Controls the way a station answers a

ringing line. To assign outside lines to display at all handsets, but

not ring at all handsets, Disable Direct Ring.

• Toll Restrictions: Control which lines are allowed to make or receive

outside calls. They are programmed through a series of toll tables,

which are then assigned to lines and stations. If you copied an

existing wired set, Toll Restrictions will be set correctly for the

handset.

• The following features should be turned off on handsets:

— Line Intercom: Enable Voice Block

— SOHVA: Disable

— All Call and Zone Paging: Clear

Programmable buttons

Program the buttons on the handset to correspond with buttons on

the wired set.

Copy programming

After the handset or phones have been programmed, copy the

programming to all “like” handsets.

The installer can now test the handsets.