Specifications

Interface Implementation

PN: 1725-36132-001_E.doc

The FCN [number] and LINE [number] labels represent the key

sequence on the handset mapped to the corresponding key on the

desk set. The SHIFT button + LINE button on the deskset is used to

produce various features. These are accessed on the handset by using

the

FCN key plus the number key as shown above.

The handset function menu default settings are shown below; these

may be changed as described above in Function Menu Programming.

Some of these functions (Mute, Redial, Forward, etc.) are activated by

softkeys or

FCN menu options on the SpectraLink 6000 and

SpectraLink 8020/8030 Wireless Telephones.

FCN + 1

MUTE

FCN + 2

FWD

FCN + 3

PICK

FCN + 4

PAGE

FCN + 8

EXIT MENUS

FCN + 9

TRNS/CONF

Program Comdial

Program the Comdial for use with the SpectraLink Wireless

Telephone System using a PC Terminal Emulator (VDT) or 8012S.

Software versions may vary. As you program, be sure to read the

menus and prompts to see that the commands correspond to the

instructions.

As a precaution, the existing programming should be saved to the PC

as a binary file. This can be done from system COS using Xmodem

protocol.

Program Handsets

Copy settings from a wired set

If possible, copy the settings from a wired telephone with similar

settings and restrictions to a SpectraLink Wireless Telephone. Once

this is done, you can program the options on one SpectraLink

Wireless Telephone, then copy the programming to other handsets or

groups of handsets.