Specifications

System Programming DXP Correspondence Manual

5.2

Master Clearing

The System

The first item on the system menu is defaults; the defaults menu lets

you return any of the DXP settings to their original factory-set

parameters. The following section details the master clearing of the

entire system, while section 5.3 covers the rest of the defaults menu.

The master clear feature is an on-line procedure that returns the entire

system to the default operating parameters, clears all stored speed dial

numbers, and clears any other custom programming as well. Master

clear is not part of the off-line PCMMI programming procedure. The

system takes 15 to 20 seconds to exercise a master clear command

depending upon the system size.

You can take one of three different master clear options.

NOTE: None of these master clear modes changes the serial port

settings. Only

pevorrning

sofhvare

upgrade changes the

serial ports to the default settings.

With master clear mode 1 option, the system assumes a set of

parameters that reflect a key system arrangement. This configuration

means that multiline telephones, except stations 101 and 102, receive

direct line appearances in their button maps but have no group

intercoms assigned to their hunt lists. Stations 101 and 102 have four

group intercom numbers assigned to their hunt lists and are button

mapped accordingly.

With master clear mode 2 option, the system assumes a set of

parameters that reflect a hybrid, or PBX-like, system arrangement,

which means that multiline telephones have no direct line appearances

in their button maps; however, they do have two unique group

intercoms assigned to their button maps and to their hunt lists.

With master clear mode 3 option, the system assumes a set of

parameters that does not map any station buttons, assigns no group

intercom access or personal intercom numbers to the stations, and

disables both zone and all-call paging features.

CAUTIONI

You can only exercise the master clear when you enter the

programming session with the installer password; however, in a

defaulted system, the administrator password is the same as the

installer password, giving master clear privileges to the administrator

as well. For information on changing the password, see section

51.5.

2 DXP Correspondence Manual