Specifications

3.11
Connecting An
External Paging
Device
You can connect a paging device either to the paging port on the
Services board or to a line port. The line port can be used to couple a
station’s voice path to an external paging device. Any station with the
line appearance can use the PA system by selecting the line; IST
stations can use the amplifier by dialing a line-group access code.
When the paging device is connected to a line port, users can speak
through or dial DTMF tones or pulses to the external device through
the PA device, depending upon the type of paging device.
Connect the voice pair (tip and ring) leads of the line dedicated as an
auxiliary port to the audio input of an external paging amplifier. You
will have to program the line as an auxiliary line in programming.
Make sure to consult the installation manual of the paging device for
any requirements or specifications beyond those of the DXP.
installing The DXP 3 - 13