Specifications

DXP Correspondence Manual Installing The DXP
Expansion Cabinet Power Supply
The installation of the expansion cabinet power supply is virtually’
identical to that of the main cabinet power supply. One critical
difference between the two, however, is that there is an AC and DC
connection from the expansion cabinet’s power supply to the main
cabinet’s power supply (for more information on the expansion
cabinet power supply, see lMI66-086). Both the power cord and the
DC connection from the expansion cabinet run through the access hole
on the bottom of the expansion cabinet and through the hole on the top
on the main cabinet. The AC cord then plugs into the three-pronged
outlet on the front of the main power supply; the DC power cable
connects to the S-pin male connectors on the main and expansion
cabinet’s power supplies.
You should have checked both of your power supply voltages earlier,
so now power-down and continue with your installation (see
IMI66-085 for information on testing the power supplies).
Installing The DXP 3 - 5