Specifications

15.5
The computerized attendant operating position consists of the
PC A ffen&nf ?z-based personal computer
,
Position
.
l
Programming
a proprietary interface circuit board (factory-installed in the
computer expansion slot),
l a customized keyboard,
l
a program diskette,
.
and all necessary cables for connecting the equipment to the
system.
The system will accept four PC attendant positions. Each PC attendant
position replaces one telephone from the system because a telephone
cannot be connected to the same station location that the programmer
assigns to the Total Control PC attendant position.
Enabling The PC Attendant Position
Each PC attendant position requires a station port (though you do not
need station board installed for that port), two line ports, a serial data
port, and a dedicated line group for operation. You must identify these
items for each PC attendant position.
NOTE: The lines that you assign here are exclusively for PC attendant
position use and cannot be used for out-going call operations. Do
not assign them for any other system use.
Programming A Hunt List For PC Attendant Use
Assign eight intercom numbers to an intercom hunt list for the PC
attendant position’s use. The assigned numbers must include the
personal intercom number of the PC attendant position (the number
for the station location that the PC attendant position occupies) and
seven group intercom numbers that are set aside for its exclusive use
(group intercom numbers range from 3 l Ol-3292,41104292,
5000-5023) . When you assign group intercom numbers to the hunt
list, the system automatically adds them to the group intercom access
list for the PC attendant position.
NOTE: You can’t assign the same group intercom to more than one
station’s intercom hunt list. Also, reserve these group intercom
numbers for exclusive use by the PC attendant position. Do not
assign them to any other station.
15 - 12 DXP Peripherals