Specifications

DXP Peripherals
DXP Correspondence Manual
Tracker
15.3
The Tracker Paging System is a paging device that interfaces a DXP
~@-w
system with Tracker pagers (personal pager devices). When the
T rat erk Paging System is installed, you must use the following
Svsfem programming routines to establish proper communications between
Prograiiming 1
the system and individual Tracker pager users.
I
Programming Tracker Paging System Options
Tracker Paging System options consist of selecting the serial port that
you will use for connecting the base station, enabling or disabling
Tracker Paging System operation, and selecting PC Attendant
1 through 4.
NOTE: After you have enabled the Tracker paging system and saved your
programming selections, the DXP system connects with the
Tracker base station and displays the following message:
Initializing TRACKER unit, please wait. . .
If the Tracker base station is correctly installed and operational, the DXP
system then displays the following message:
Installation complete, TRACKER is on line
IJ; however, the Tracker base station is not installed or fails to
connect, the DXP system displays the following message:
Installation error, verify programming or installation
15 - 4 DXP Peripherals