Specifications

DXP Correspondence Manual
Automatic Route Selection
I
L
12
Automatic Route Selection
12. I
Introducing
Automatic Route
Selection
Automatic Route Selection (ARS) allows the system to automatically
route a call over the least-costly line group available to that station.
The system automatically modifies the dialed number, if needed, to
match the selected line group. Additionally, ARS provides the costing
information for the dialed call that is reported by the station message
detail accounting feature. ARS makes routing decisions (which lines
to route a call over, if and how to modify a number, and costing
information) based entirely upon the programming of the system.
NOTE: When the ARS feature is active, the user selects ARS by dialing 9.
Because direct line selection by the user bypasses the ARS route
selection feature, the programmer normally does not give stations
direct line appearance when ARS is part of the system operation.
The ARS feature can operate with the toll restriction feature or
independently from it; however, both features use the same entry table
for programming. The programmer enables or disables automatic
route selection on a system-wide basis. A defaulted system has ARS
disabled.
Automatic Route Selection 12 - 1