Specifications

DXP Correspondence Manual
Intercom Programming
Intercom Numbers
9. I
The system provides a maximum of 600 intercom slots with 192 slots
Introducing
set up as personal intercom numbers and up to 408 group intercom
numbers. Group intercom numbers are four digits and begin with
Intercom
number 3 101. At default, the blocks of intercom numbers are assigned
Programming as follows’
101-292 = personal intercom numbers
3101-3292,4101-4292,5000-5023 = group intercom numbers
5024-5999 = unassigned-used for renumbering purposes
600-899 = feature codes
Remember, the system numbers the station ports and defaults the
personal intercom numbers beginning with the station board located in
the left-most slot nearest the central processor unit (CPU) circuit board
(station port 1 is personal intercom number 101, for example). If a
station slot is unavailable (the system includes an auxiliary board for
instance), that block of personal intercom numbers is also unavailable
for use until you use the procedure in section 9.5 to re-number the
unavailable intercom numbers. For example, if the slot that provides
station ports l-8 (intercom 101-l 16) is occupied by a DXAUX board
and you wish to retain that intercom block, you can arrange station
ports 17-192 to begin at intercom 101.
Intercom Programming 9 - 1