Specifications

DXP Correspondence Manual Line Programming
8.26
Enabling Or
Disabling DISA
Lines
Use the following programming instructions to enable or disable
DISA capability on lines 1 through 128. Also, use the DISA Voice
Options 1 through 4 to select digital voice announce @VA) messages.
For example, selecting DISA voice option 2 will cause welcome
greeting 2, day main menu 2, night main menu 2, recall no answer 2,
and recall busy 2 prompts to play whenever a DISA line is covered by
DVA. Refer to section 15.4 for complete DVA programming details.
I
Programming DISA Authorization Codes
DISA callers with assigned authorization codes have access to
advanced system features. Authorization codes are associated with
either personal or group intercom numbers; therefore, when a DISA
caller enters his or her authorization code, the code alerts the system as
to what features to make available to the caller. Once callers access
features with authorization codes, the access remains in effect until
any idle time exceeds the authorization code time-out period. Use this
programming procedure to assign or modify authorization codes and
to tie the authorization codes to accompanying intercom numbers. See
the following paragraph, Remote COS Programming, for information
on assigning a station class of service to the intercom numbers.
Remote COS Programming
DISA callers that have assigned authorization codes have access to
advanced system features. The features that they have access to are
controlled by the station class of service that you assign with this
programming procedure. The intercom number that is associated with
this remote COS assignment is the same intercom number that is
associated with the caller’s DISA authorization code that you set using
the Programming DISA Authorization Codes procedure described in
the previous paragraph.
Line Programming 8 - 19